Posted on Leave a comment

You’re Going to Love This…..

You’re Going to Love This…..

Happy spring (almost!)

We are always looking for unique and unusual items to accentuate your designs.

Recently our client Paula inquired about the tiny silver beads she was seeing on several bracelet designs online.

After a few emails we followed up on her advice to add silver beads to our product listings and voilá! They are now available.

Saamisupplies is proud to offer Sterling Silver 3.00mm beads in packages of 100. Use these beautiful high polished beads to accent your favorite bracelet designs.

Manufactured exclusively for saamisupplies these sparkling beads provide an attractive contrast to the soft white of our 0.35mm pewter thread.

Integrate them into your braids or sew them onto your projects separately.

And since we’re talking materials, let’s talk about one of the hardest working tools of the craft.

Now you can purchase No. 10 round needles in packages of 20.

These high quality German manufactured needles are perfect for sewing finished braids to your leather bracelets and necklaces.

Use these sharps with transparent or cotton thread.

The diameter of this needle is ideal when separating braid sections during stitching.

*Remember to only use “sharps” when sewing your braid to your leather. Do not use a leather needle when sewing braids as it will cut the pewter thread very quickly!

These are just a few examples of new products we will be adding to the website in the coming weeks so we are excited and curious to know what our clients and students are creating!

Let us know if there are other items you would like to see us carry.

If you haven’t subscribed to the blog please do and receive a sweet 20% off coupon on your order!

Please share photos and feedback about your projects on our Saami Inspired Crafts Facebook Page. We’d love to see your creations!

Posted on Leave a comment

A History of Tin Thread Embroidery of the Sámi People

A History of Tin Thread Embroidery of the Sámi People

We love pewter thread for the distinct and unique properties that make it so wonderful to braid and weave when creating bracelets and necklaces. The coiled thread is soft and holds its shape after years of wear.

However, did you know that the use of coiled thread to decorate clothing and everyday items has been around for centuries? Small fragments of gold coiled thread have been found in Viking graves outside of Uppsala dating back to almost 3,000 years ago.

Historically the art of sewing silver, gold and even bronze thread to cloth and leather can be found around the world. There are examples to be found throughout a myriad of cultures including textiles and objects from China, Japan and India.

The Saami people of Norway, Sweden, Finland and Russia have been using tin thread embroidery since the 1600’s and the designs and patterns are specific and unique to the many Saami groups within the culture. In particular, tin thread embroidery is used to adorn the many styles of traditional Saami clothing called gákti.  Here are some examples from my Pinterest page.

 

 

 

Sadly, tin thread embroidery almost disappeared in the 1800’s when Saami groups were being forced to assimilate to modern Norwegian and Swedish culture. I just finished watching the film “Sámi Blood” this past week and I highly recommend it to anyone who would like to know more about this period.

Fortunately, around 1905 a gentleman named Andreas Wilks from Sweden brought tin thread embroidery back to the forefront of Saami culture after discovering his mother’s tools for creating the distinctive coiled thread. He began teaching classes throughout Northern Sweden and managed to prevent this beautiful craft from disappearing altogether. *(From Tin Thread Embroidery by Mona Callenberg 1997)

Here’s a link to some wonderful books about Saami culture.

Stay tuned for my next blog where I’ll show some different and creative ways to use tin thread.

Don’t forget to subscribe so you can enjoy firsthand new kits, techniques, specials and discounts!

 

“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.”

 

 

 

 

 

 

 

Posted on Leave a comment

Get some class! Crown Trout Jewelers to host Saami Inspired Bracelet Class

SaamiInspiredbracelets

In addition to creating custom jewelry in our Lanesboro, MN studio our Saami Inspired Bracelet Classes keep us on the road for a good portion of the year.  We’ve been teaching these classes for 16 years and have introduced this unique craft to over 1300 students. After teaching and presenting in dozens of venues and traveling to three states just this past year, we are happy to be hosting our final class of 2017 on Saturday November 18 from 10-5pm in Lanesboro, MN. Need a jump on some handmade Xmas gifts? You’ll be the most coveted Secret Santa around!

Go to http://crowntrout.com/classes/saami-friendship-bracelet-class/ for a complete class description and prices. Can’t make it to a class? Order a bracelet kit and supplies from www.saamisupplies.com.

Make a Saami bracelet
Make a Saami bracelet
Posted on Leave a comment

Saamisupplies.com announces International Shipping Service

Saamisupplies.com announces International Shipping Service

Greetings everyone!

We have expanded our ordering platform to include International Flat Rate Shipping! With over 700 subscribers we have been getting order inquiries from Japan, Switzerland, Spain and even Russia. Stay tuned for new products, kits, books and tips and tricks for this unique craft. Don’t forget to check out our class schedule at www.crowntrout.com for upcoming venues and new class offerings for 2018. Get a jump on those Christmas gifts by ordering materials and kits early and don’t forget to subscribe to our blog.

SaamiInspiredbracelets
SaamiInspiredbracelets

 

saamithreads

Saami Reindeer Leather Bracelet Stitching
Saami Reindeer Leather Bracelet Stitching

 

Posted on

Add some color to your pewter thread bracelets with colored cord.

Saamibracelets

Join our blog and add some color to your pewter thread bracelets.  I love the look of traditional pewter thread braids but sometimes I long for a little variation to really make the materials pop.  I usually wear several bracelets at a time and often I can color coordinate my selection with what I’m wearing. We recently added a rich rainbow of 1.00mm round cowhide leather cord to our inventory at saamisupplies.com.  Follow the steps in this project to brighten you bracelets and your day.

Double Four Braid Pewter Thread Bracelet with 1.00 Round Leather Colored Cord

Begin by cutting 4 pieces of 0.35mm pewter thread approximately 18 inches long each.  Cut one 18 inch section of 1.00mm  round leather cord.

Take 2 pieces of pewter thread and place a strand on either side of your leather cord.  These will be your borders.  Double the entire piece in half on the end of an open paper clip attached to your table clamp.  Make sure to keep everything flat.  It’s a bit of a challenge so don’t be discouraged if it seems like you need another set of hands to get everything positioned properly.

Double your remaining 2 strands of pewter thread over the end of the paper clip and you are ready to start braiding.

Proceed to braid as you would for the double four-strand pewter thread bracelet project in our previous post this past week.

You should end up with a 6.5 – 6.75 inch finished braid.  You can sew the braid to a leather strip at this point or simply cap the end with a button and loop for a different look.

It’s hard to believe that the addition of color can make this braid look so different.  You can also try using round polyester cord or silk beading cord for variety.  I’ve had students use flat strips of suede or reindeer hide and even ribbon!  Remember to use materials at least 1.00mm wide so your material doesn’t disappear  between the sections of your pewter thread.

Don’t forget to join our blog and stay tuned for another exciting project next week. Visit www.saamisupplies.com for everything you need to fuel your creativity!

Posted on

Steps on how to create a double four-strand pewter thread braid

Hey everyone!  I’ve gotten lots of requests over the past few weeks regarding the steps on how to create a double four-strand braid for our pewter thread and Saami inspired folks.  This is a beautiful dense Irish looking pattern that takes a bit of practice.  To start you will need 4 strands of 0.35mm pewter thread approximately 20″ long each.

Double your strands in half over the hook of your paper clip and divide into 4 sections with two strands in each section.  Don’t worry if this looks a little wonky to start with.

Take your two sections in the middle and cross the right section over the left section. and pull taut.

Take the outermost section on your left and cross it over the nearest section and pull over to the right.  Pull taut.

Take the outermost section on your right and cross it under the nearest section and pull over the left.

Pull both sections firmly to either side and you should begin to see the pattern emerging.

Depending on how tightly you braid you should end up with a finished braid approximately 6.5 to 6.75 inches long. Remember to figure that a good 0.25 inch on either end will be hidden in the body of your bracelet if you are going to sew the braid to a leather strip.  These proportions work well for a 7 inch finished bracelet on reindeer hide so if you want a longer braid increase the length of your strands by 2 inches (20 – 22 inches).  Again, depending on the how tightly you weave your strands will determine the overall finished length of the braid.  Strands measuring 22 inches in length should yield you a finished braid measuring approximately 7.7 to 8 inches long.

Good luck and I am always happy to answer questions and help in any way I can.  Don’t forget to share your projects on our Saami Inspired Facebook Page.  Thanks for following our blog and stay tuned for a new project post May 6th where we’ll add a little color to your life.

Posted on

New Twists on Saami Inspired Four Braid Pewter Thread Bracelets

Saami bracelet

I don’t know about you but sometimes I can get a little crazy when it comes to all the different variations of braids that are possible for my bracelets.  For example, I’m working on the two bracelets pictured below which are double strand, four braid weaves.  They are essentially the same except for the division of strand groupings.  In the first picture on the left, the braid on the left (“dubbel fyrflata”) uses around 6 feet of 0.35mm tin thread divided into 4 sections and doubled over for a 6.5 inch finished braid.  The style on the right uses 3 strands at 18.5 inches each and 1 strand at 21 inches doubled over for a 6.5 inch finished braid.  It’s all in how you divide up the strand groups.  Stay tuned for some examples where we combine leather, beads, silk cord and fish leather into the braid!

 

Saami bracelet
Saami bracelet

 

Posted on

Beautiful Pewter Thread!

Tin thread
Tin thread
Tin thread
Tin thread

Our 0.35mm pewter thread is one of the most popular sizes for bracelets, tin thread embroidery and whatever sparks your creativity!  This pewter thread is comprised of 96% tin and 4% silver.  Saami Suppplies provides you the highest quality pewter thread for all of your Saami inspired projects!

Posted on

Best Saami Supplies!

Velkommen to our site!  We offer the best tin thread, reindeer hide products, buttons and leather needles.  Ordering is easy and all International duty and tariffs have been absorbed to give you the best price and shipping time ever!

Reindeer antler button
Reindeer antler button
Tin thread
Tin thread
Reindeer Leather Saami
Reindeer Leather Saami